Tiegel

 

MAC offers the Tiegel line of Dry Charge Smart Dryers, WashMax water filtration, Group Burning - LO, JO, WO, Assembly Equipment such as Side Terminal Welders and Thru-the-Partition (TTP) Welders. 

Group Burning
Group Burning.png

Ad Sheet

Product Capabilities

Group Burning JO, LO, WO Machines

TIEGEL JO GROUP BURNING MACHINE


The Tiegel Group Burning Machine has been a proven money-maker
over the years due to its flexibility and efficiency. It is capable of
burning all SLI automotive, as well as truck and bus batteries. With
change-over time well under 15 minutes, short runs are economical
on this machine.
The JO Group Burner comes equipped with 1 set of combs, 4 sets of
post locators and 4 sets of dams. Additional tooling is available at a
nominal charge.
This machine produces day in and day out with no warm-up time
and little to no scrap (burned cells do not have loose plates). The
Tiegel Group Burning Machine produces better batteries because
there are no broken separators from assembly. The plates are in better
alignment due to the novel upside down loading. More important, no
lead run-downs are possible with proper tooling, because of our
positive closure between combs and post locators.
Options that are available are the following:
"C" -Automatic turnover with program opening and closing of
the combs.
"DMN" - Accommodation to different plate widths.
"B" - Automatic Burning (saving an additional 10% to 20% in
assembly time).
Continuous research and development assures that your specific
needs can be met. We invite inquiries on machines from your
smallest electronic power cells to the largest of traction cells.

SPECIFICATIONS TIEGEL MODEL JO GROUP BURNER:


ENGLISH:
Air Operated: 80 PSI
Floor space: 12 sq.ft.
Weight: 450 lbs.
METRIC:
Air Operated: 6 ATM pressure
Floor space: 1.08 sq.m.
Weight: 204 kilograms
 

TIEGEL LO GROUP BURNING MACHINE


The Tiegel LO Group Burning Machine utilizes all of the proven
qualities and features of the Tiegel air operated JO Group Burning
Machine and adds several new features not possible on the JO Group
Burner.
The LO Group Burning Machine loads and unloads at a forty-five
degree angle. This feature has a twofold purpose. First, the angle
makes loading and unloading the machine significantly easier.
Second, the groups are better aligned because the plates and
separators are lined up on their sides on one flat surface and on two
points at the top, an ideal three point system.
An automatic clamp presses the group firmly against a flat side. The
clamp is located close to the comb so that when the combs engage
and withdraw better support is given to the groups, keeping the
plates together.
Wide open pockets permit burning six elements with plates up to
6-1/8 inches wide and cell thickness up to 4-5/8 inches, with no 
adjustment needed for smaller plates and cells. Larger comb opening
allows easy unloading of normal or awkward groups with posts
overhanging in both the X and Y axes.
The LO Machine automatically positions the groups and locks the
plates into place before turning over into the horizontal burning
position. These added features make the LO Group Burner the most
precise group burner available.
The LO Group Burner can also be equipped with the standard Tiegel
Automatic Burning.


SPECIFICATIONS TIEGEL MODEL LO GROUP BURNER:


ENGLISH:
Air Operated: 80 PSI
Floor space: 12 sq.ft.
Weight: 450 lbs.


METRIC:
Air Operated: 6 ATM
Floor space: 1.11 sq.m.
Weight: 204 kilograms

TIEGEL WO GROUP BURNING MACHINE

 

THE MACHINE BUILT TO TAKE ENVELOPE PLATES!
The Tiegel WO Group Burning Machine utilizes all of the proven
qualities and features of the Tiegel air operated LO & JO Group
Burning Machines and adds several new features. This machine has
been specifically designed to burn envelope plates where the
separators can not be shifted once the element has been burned. It is
not recommended for loose type separators.
The WO Group Burning Machine is a top loading machine. Top
Loading permits the operator to see the comb closure which helps
prevent jam-ups. The WO Group Burning tooling is completely
interchangeable with our standard LO and JO tooling. Changeover
can be accomplished within a five minute period.
Wide open pockets permit burning six elements with plate sizes of
up to 6 inches wide and cell thicknesses of up to 4-3/4 inches. The
comb is completely out of the way, allowing for easy loading and
unloading of normal or awkward groups.

SPECIFICATIONS TIEGEL MODEL WO GROUP BURNER


ENGLISH:
Air Operated: 80 PSI
Floor space: 12 sq.ft.
Weight: 450 lbs.


METRIC:
Air Operated: 6 ATM
Floor space: 1.11 sq.m.
Weight: 204 kilograms
 

Media